CarboCoke 40
Preferred Grade As Ladle Addition
- Sulfur: <1.75%
- Ash: <.50%
- Moisture: <.30%
- Fixed Carbon: >97%
- Typical Sizing: 3/8" x 0
A proven high carbon product utilized in the production of grey and ductile irons used for various casting applications. A widely acceptable carbon candidate for foundries.
CarboCoke 60
Preferred Grade as a Carbon Backfill
- Sulfur: 2.5-3.0%
- Fixed Carbon: 97%
- Bulk Density: 56-60 lbs/ft3
- Moisture: <0.2%
- Typical Sizing: 20 Mesh
Proven conductive carbon backfills specifically sized for the most demanding well systems. Mixes easily with water and can be effectively pumped into deep well anode systems.
CarboCoke 100
Preferred Grade As Ladle Addition
- Sulfur: <1.0%
- Ash: <.50%
- Moisture: <.30%
- Fixed Carbon: >97%
- Typical Sizing: 10M x 0
A proven high carbon product used in cored wire production or as a lower sulfur recarburizing agent in steel making.
CarboCoke 250
Preferred Grade As Ladle Addition
- Sulfur: <2.50%
- Ash: <.50%
- Moisture: <.30%
- Fixed Carbon: >97%
- Typical Sizing: 3/8" x 0
A proven high carbon product utilized primarily as a recarbuizing agent in ladle trimming practices. A versatile, high value carbon used in various steel making steps.
CarboCoke 400
Preferred Grade as a Carbon Backfill
- Sulfur: 4.0%
- Fixed Carbon: 97%
- Electrical Resistivity: 0.04 ohm-in
- Bulk Density: 52-57 lbs/ft3
- Moisture: 0.2%
- Typical Sizing: 20 Mesh
Proven conductive carbon backfills specifically sized for the most demanding well systems. Mixes easily with water and can be effectively pumped into deep well anode systems.